Teknicircuits, printed circuit board, pcb, prototype, printed circuit board fabricator, circuit boards, assembly, multi-layer, pcbs, prototype circuit boards, fast printed circuit boards, quick turn, electronic circuits, low cost circuit boards, custom printed circuit boards, No Touch PCB, NoTouch PCB, HDI circuits, Microelectronics PCB, MilSpec Circuits, Assembly services,
printed circuit board design printed circuit board repair printed circuit boards made rak printed circuit boards making printed circuit boards soldering printed circuit boards ipc printed circuit board printed circuit board fabrication
|A printed circuit board, or PCB, is used to mechanically support and electrically connect electronic components using conductive pathways, or traces, etched from copper sheets laminated onto a non-conductive substrate. It is also referred to as printed wiring board (PWB) or etched wiring board. A PCB populated with electronic components is a printed circuit assembly (PCA), also known as a printed circuit board assembly
PCBs are rugged, inexpensive, and can be highly reliable. They require much more layout effort and higher initial cost than either wire-wrapped or point-to-point constructed circuits, but are much cheaper and faster for high-volume production. Much of the electronics industry's PCB design, assembly, and quality control needs are set by standards that are published by the IPC organization.
Line art and text may be printed onto the outer surfaces of a PCB by screen printing. When space permits, the screen print text can indicate component designators, switch setting requirements, test points, and other features helpful in assembling, testing, and servicing the circuit board.
Screen print is also known as the silk screen, or, in one sided PCBs, the red print.
Lately some digital printing solutions have been developed to substitute the traditional screen printing process. This technology allows printing variable data onto the PCB, including serialization and barcode information for traceability purposes.
electronic circuit boards
circuit board fabrication and repair
how to solder multi-layer circuit boards
laser imaging printed circuit boards
printed circuit board design
printed circuit boards usa vendor
sierra circuits danbury ct
single layer printed circuit boards usa vendor
solutions used to attach the copper foil onto the printed circuit
through hole plating inc
Originally, every electronic component had wire leads, and the PCB had holes drilled for each wire of each component. The components' leads were then passed through the holes and soldered to the PCB trace. This method of assembly is called through-hole construction. In 1949, Moe Abramson and Stanislaus F. Danko of the United States Army Signal Corps developed the
Auto-Sembly process in which component leads were inserted into a copper foil interconnection pattern and dip soldered. With the development of board lamination and etching techniques, this concept evolved into the standard printed circuit board fabrication process in use today. Soldering could be done automatically by passing the board over a ripple, or wave, of molten solder in a wave-soldering machine. However, the wires and holes are wasteful since drilling holes is expensive and the protruding wires are merely cut off.
In recent years, the use of surface mount parts has gained popularity as the demand for smaller electronics packaging and greater functionality has grown.